Protector Invisible Matt transparent floor varnish anti slip 1 liter

Protector Invisble Matt


==
A water-based transparent 2-component paint based on PU with a very high wear resistance.

To be used for surfaces such as stairs to be provided with an anti-slip layer that is transparent mat.

Add 50 ml of hardener to 1 liter of Protector Invisble Matt and mix well. Let the mixture stand for ± 10 minutes and mix again before use. The product can then be applied thinly with a brush or roller. The wood must be dry and free of dirt. Apply at least 2 to 3 coats . After each coat, lightly sand the surface with grit P240 and then treat again. Apply by brush or roller. Consumption is ± 10 - 15 m2/litre. Shelf life Protector Invisble Matt : 1 year in closed packaging. Shelf life of hardener: 1 year in unopened packaging. After the material (Component A and B) has been mixed, there is a limited processing time (the so-called 'pot life') of approximately 3 hours. Dilution: not necessary, the product is ready to use. Store frost-free. Do not use below 10°C. Brushes and rollers can be cleaned with soap and water.